(a) The owner of applicable buildings, as described in Section 1503.02 above shall install or cause to be installed a Lock Box System and/or Lock Box Document Vault prior to the issuance of a Certificate of Occupancy for any portion of the building for new or remodeling construction or within eighteen months of the adoption date of this section if no new construction or remodeling takes place.
(b) The Lock Box shall be installed on the front of the building near the main entry door and between six and eight feet above the ground unless approved at a higher or lower level by the Code Enforcement Officer of the Village.
(c) The Lock Box shall contain the keys for the exterior doors, the keys for all the interior doors within the building, and a called floor plan of the building. In lieu of having the interior keys at this location, a second Lock Box may be located within the main lobby of the building to hold these keys. Keys within the Lock Box shall be labeled for easy identification either by the tenant name or indexed to a floor plan of the building and shall be kept current.
(d) Where a building contains a business that is required to maintain Material Safety Data Sheets, a Lock Box Document Vault shall be installed. The Lock Box Document Vault shall be installed on the front of the building near the main entry door and between six and eight feet above the ground unless approved at a higher or lower level by the Code Enforcement Officer of the Village. The vault shall contain copies of the Material Safety Data Sheets that are required to be on file within the building as well as a floor plan or written description that indicates the location of the general areas of these materials will be found within the building.
(Ord. 11-2002. Passed 5-8-02.)