§ 156.075 MONUMENTS AND MARKERS.
   Monuments and markers shall be placed so that the center of the pipe or marked point shall coincide exactly with the intersection of lines to be marked, and shall be set so that the top of the monument or marker is level with the finished grade.
   (A)   Monuments. Monuments shall be of stone, pre-cast concrete or concrete poured in place with minimum dimensions of 4 inches by 30 inches set vertically in place. They shall be marked on top with iron or copper dowel set flush with the top of the monument, or deeply scored on top with a cross. Monuments shall be set:
      (1)   At the intersection of lines forming angles in the boundary of the subdivision, provided that not more than eight monuments shall be required; and/or
      (2)   At the intersection of the center lines of all streets and also at the center points of all cul-de-sac turnarounds.
   (B)   Markers. Markers shall consist of iron pipes or steel bars at least 30 inches long, and not less than 5/8 inches in diameter. Markers shall be set:
      (1)   At the beginning and ending of all curves along street property lines;
      (2)   At all points where lot lines intersect curves, either front or rear; and
      (3)   At all angles in property lines of lots. At all lot corners not established by monuments.
(Ord. 98-26, passed 12-21-1998)