§ 50.066  METER SETTERS AND BOXES.
   (A)   Meter boxes and copper setters must be purchased from the town. Copper setters shall be Ford or equal. Copper setters shall be installed with locked rings on the town side of the meter and with check valves. Meter boxes shall be Dewey Brothers or approved equal.
   (B)   Commercial and industrial meters shall be of a size and configuration approved by the town.
   (C)   The town shall provide and install all meter boxes and setters at the owner's or developer's expense except as provided at division (D) of this section.
   (D)   Taking into account the town's workforce resources and any other circumstances deemed relevant, the Administrator may require that the developer install meter boxes and setters for new development or redevelopment involving either or both of the following:
      (1)   Multifamily residential use requiring installation or replacement of more than 12 meters; or
      (2)   Commercial use requiring installation or replacement of meters 1.5 inch or greater in size.  Any such installation by a developer must be inspected by and completed to the satisfaction of the Administrator.
(Ord. passed 6-21-2011; Ord. passed - - )