§ 1003.14 CI, Mixed Use Commercial Industrial District.

   Subd. 1.   Purpose. The purpose of the CI, Mixed Use Commercial Industrial District is to provide a zoning district where warehousing and light industrial development can thrive alongside compatible office and commercial uses.

   Subd. 2.   Uses. Uses allowed within the district are as described in subsection 1003.05.

   Subd. 3.   Uses Standards. Uses are subject to the applicable provisions of the performance standards in Section 1006 and the process requirements in Section 1002.

   Subd. 4.   Lot Area, Height, and Setback Requirements. The following minimum requirements shall be observed in the CI District subject to additional requirements, exceptions, and modifications set forth in this chapter.

Table 11
CI, MIXED USE COMMERCIAL INDUSTRIAL DISTRICT*
Minimum lot area	40,000 square feet
Minimum lot width	150 feet
PRINCIPAL STRUCTURE SETBACKS
Front	40 feet
Railroad right-of-way	10 feet
Rear	30 feet
Side	20 feet
Wetland setback and buffer	30 feet
ACCESSORY STRUCTURE SETBACKS
Front	Allowed by CUP
Rear	10 feet
Side	10 feet
PARKING SETBACKS
Front	10 feet
Rear	5 feet
Side	5 feet
Structure and parking setback adjacent to R District	20 feet
BUILDING HEIGHT	35 feet
ACCESSORY BUILDING HEIGHT	17 feet
IMPERVIOUS SURFACE COVERAGE	85%
Note to Table: *   All uses located within the Shoreland Overlay District are subject to the standards in subsection 1004.03