(A) Table 1246.12-A. R-3 District Requirements, Figure 1246.12-A. R-3 District Requirements: Plan, and Figure 1246.12-B. R-3 District Requirements: 3-D establish bulk and setback regulations for the R-3 District.
(B) Standards for additions to existing bungalows. The following requirements pertain to second story additions to existing bungalows in the R-3 District.
(1) Minimum addition setback. The bungalow addition shall be set back a minimum of six feet from the front facade and shall maintain the existing front dormer, when applicable.
(2) Maximum height. After the six-foot setback, the maximum height of the bungalow shall be 30 feet.
(3) Roof pitch. The roof pitch of the addition shall be similar to the roof pitch of the bungalow.
(4) Materials. The exterior walls of the addition shall be clad with material that has an analogous color to the original bungalow. Shingles and vinyl siding are not permitted cladding materials for the exterior walls of any bungalow addition.
Table 1246.12-A. R-3 District Requirements
|
Table 1246.12-A. R-3 District Requirements
| ||
Bulk Requirements | ||
Minimum Lot Area | 3,750 sf | |
A | Minimum Lot Width | 30 ft |
B | Maximum Principal Building Height at Front Facade | 35 ft and 2.5 stories for buildings other than bungalows; 20 ft, 15 ft to the gutter for bungalows |
Maximum Height for Second Story Addition to a Bungalow | 30 ft | |
Minimum Setback for a Second Story Addition to a Bungalow | 6 ft | |
Maximum Impervious Coverage | 75% | |
Setback Requirements | ||
C | Minimum Front Setback | 10 ft |
D | Minimum Corner Side Setback | 5 ft |
E | Minimum Interior Side Setback | 3 ft |
F | Minimum Rear Setback | 25 ft |
Figure 1246.12-A. R-3 District Requirements: Plan
Figure 1246.12-B. R-3 District Requirements: 3-D
(Ord. 17-31, passed 9-12-2017)