(A) Purpose. The I-1 Light Industrial/Heavy Commercial zone is intended to provide areas for light industrial and heavy commercial uses without creating adverse effects on the surrounding land use.
(Ord. 466, § 2-10-2, passed 5-11-98)
(B) Permitted uses.
(1) Any use permitted in a C-2 zone, provided all the uses therein shall be subject to the same regulations as specifically set forth in the I-1 zone.
(2) The following uses or uses of similar type:
(a) Animal hospitals or kennels.
(b) Motor vehicle assembly.
(c) Painting, upholstering, rebuilding, reconditioning, repair or overhauling of motor vehicles and tire retreading or recapping shops.
(d) Blacksmith shops and machine shops.
(e) The manufacture of pottery or figurines or any other similar ceramic products using only previously pulverized clay and kilns fired only by electricity or gas.
(f) Draying, freighting or trucking yard or terminal.
(g) Warehousing/wholesaling.
(h) Furniture manufacture.
(3) The following uses or uses of a similar type, provided they shall be screened from view on the side or sides which abuts a thoroughfare or an R or C zone. Screening shall consist of either a dense screen planting, a solid wall, a uniformly painted board fence, an earthen mound or a combination of the aforementioned. The screening shall not be less than eight feet above an abutting thoroughfare, measured vertically from the center of the road, and not less than eight feet above the general topography if abutting an R or C zone.
(a) Auto wrecking and body and fender works.
(b) Bleaching or dyeing.
(c) Stone cutting.
(4) Advertising devices shall be permitted, provided that they are erected in accordance with the provisions of § 152.172.
(Ord. 466, § 2-9-7, passed 5-11-98) Penalty, see § 152.999