The preliminary plat shall show:
(A) The proposed name of the subdivision;
(B) North point, scale, date, zoning, ward number, Aldermen of ward, school district(s) and Superintendent of School District;
(C) The names and address of the subdivider and of the engineer or surveyor, and data on any previous subdivisions, plats, special land usages, rights-of-way or easements in the area;
(D) The tract designation and other description according to the real estate records of the city or County Clerk and Recorder;
(E) The boundary line (accurate in scale) of the tract to be subdivided;
(F) Floodplain and wetlands. If subdivision falls outside of the floodplain, this should be noted. If there are no wetlands contained in the subject property, this should also be noted;
(G) Contours with intervals of five feet or less, referred to sea level datum as established by the United States Geological Survey;
(H) The names and boundaries of adjacent subdivisions or the names of record owners of adjoining parcels of land;
(I) The location, widths and names of all existing or platted streets or other public ways within or adjacent to the tract, existing permanent structures and their existing use, railroad rights-of-way or other important features, such as section lines, political subdivision or corporation lines and school district boundaries;
(J) Existing sewers, water mains, culverts or other underground structures within the tract and immediately adjacent thereto with pipe sizes, grades and locations indicated;
(K) All parcels of land intended to be dedicated for public use or reserved in the deeds for the use of the public together with the purpose of conditions or limitations of such reservation, if any, including but not limited to outlots, detention and retention basins and open space;
(L) The layout and widths of proposed rights-of-way, streets, alleys and easements;
(M) The profile of each street with tentative grades;
(N) The cross-section of proposed streets showing the width of roadways, location and width of sidewalks, and the approximate location and minimum size of utility mains, conduits and poles. The developer shall construct all improvements in accordance with a Standard Specification for Street and Sewer Construction, to be prepared by the City Engineer and approved by the City Council;
(O) A plan of proposed sanitary, storm water, with grades and pipe sizes indicated, and a plan of the proposed water distribution system showing minimum pipe sizes and approximate location of valves and fire hydrants, and street lighting;
(P) Names of all proposed streets;
(Q) The layout, numbers and approximate dimensions, and square footage of all proposed lots, including width of all lots at front building line;
(R) Phasing of proposed subdivision, including estimated times of completion for each phase; and
(S) There shall be no disclaimers on the preliminary plat (or improvement plans or final plat) that release liability regarding pre-existing easements, rights-of-way and the like. Further, the preliminary plat should graphically depict all encumbrances on the property proposed for subdividing.
(1960 Code, § 41-2-6) (Ord. 7128, passed 4-28-2008)