10-5-9: PERMANENT SIGNS PERMITTED FOR RESIDENTIAL PROPERTIES AND RESIDENTIAL SUBDIVISIONS:
   A.   The following standards shall apply to all properties that are used for residential purposes as follows: individual dwellings, multi-unit residential buildings, and residential subdivisions. These standards do not apply to mixed-use buildings whereby residential uses are co-located with non-residential uses.
   B.   Institutional Uses found within residential districts shall conform to section 10-5-10 Permanent Signs in the R, N, CL, CC, MU, DD, FE, I, EI, ID Districts.
Permitted Sign Types
Number Permitted
Maximum Sign Area
Additional Standards
Signs Permitted for Individual Dwellings
Permitted Sign Types
Number Permitted
Maximum Sign Area
Additional Standards
Signs Permitted for Individual Dwellings
Wall Sign
1
1.5 square feet
The sign must be mounted flush to the structure’s facade. A zoning permit shall not be required for this type of sign.
Ground Mounted Sign or Window Sign
1
2 square feet
Ground-mounted signs shall not exceed three feet in height.
Wall Sign
1 per street frontage
1 square foot for each lineal foot of building frontage
If the sign is mounted on a wall at the entrance of a subdivision, the sign area shall be no larger than 30 square feet
The sign may only be illuminated through an external light source. The light must be shielded from public view and/or rights-of-way and directed solely toward the permitted signage.
Monument Sign
1 per street frontage
30 square feet
The sign shall be at most 8 feet in height and shall be no closer than 5 feet from the right-of-way.
The sign may only be illuminated through an external light source. The light must be shielded from public view and/or public rights-of- way and directed solely toward the permitted signage.
Signs Permitted for Multi-Unit Residential Buildings and Subdivision Entrances
Permitted Sign Types
Number Permitted
Maximum Sign Area
Additional Standards
Wall Sign
1 per street frontage
1 square foot for each lineal foot of building frontage
If the sign is mounted on a wall at the entrance of a subdivision, the sign area shall be no larger than 30 square feet
The sign may only be illuminated through an external light source. The light must be shielded from public view and/or rights-of-way and directed solely toward the permitted signage.
Monument Sign
1 per street frontage
30 square feet
The sign shall be at most 8 feet in height and shall be no closer than 5 feet from the right-of-way.
 
 
 
The sign may only be illuminated through an external light source. The light must be shielded from public view and/or public rights-of- way and directed solely toward the permitted signage.
 
(Ord. 2023-7, 7-17-2023)