(A) Septic tank waste may be introduced into the POTW only at locations designated by the control authority and at such times as are established by the control authority. Such waste shall not violate this subchapter or any other requirements established by the control authority. The control authority may require septic tank waste haulers to obtain wastewater discharge permits.
(B) The control authority shall require haulers of industrial waste to obtain wastewater discharge permits. The control authority may require generators of hauled industrial waste to apply for wastewater discharge permits. The control authority may prohibit the disposal of hauled industrial waste. The discharge of hauled industrial waste is subject to all other requirements of this subchapter.
(C) Industrial waste haulers may discharge loads only at locations designed by the control authority. No load may be discharged without prior written consent of the control authority. The control authority may collect samples of each hauled load to ensure compliance with applicable standards. The control authority may require the industrial waste hauler to provide a waste analysis of any load prior to discharge.
(D) Industrial waste haulers must provide a waste-tracking form for every load. This form shall include, at a minimum, the name and address of the industrial waste hauler, permit number, truck identification, names and addresses of sources of waste and volume and characteristics of waste. The form shall identify the type of industry, known or suspected waste constituents and whether any wastes are RCRA hazard wastes.
(Ord. 199, passed 10-13-2010)