§ 154.035 SPECIAL DISTRICT DEVELOPMENT STANDARDS.

   (A)   Purpose.

      (1)   DT Downtown Mixed-Use District. The Downtown Mixed-Use District is established to accommodate developments containing a variety of commercial, office, and residential uses in Bargersville's downtown core. Uses need to be appropriate to downtown and occur at a scale cohesive with the existing urban fabric of downtown. Development in this district requires site plan approval.

      (2)   MU Mixed-Use District. This district is established to accommodate developments containing a variety of compatible commercial, office, and residential uses. The uses may be mixed vertically within a building or horizontally in close proximation to each other. Development in this district requires site plan approval.

      (3)   PUD Planned Unit Development District. This district is established to encourage large-scale, identity-building developments mixing uses, building types, and building arrangements. Development in this district requires connection to public water and public sewers and site plan approval. See § 154.180 for the approval process and standards for planned unit developments.

   (B)   Lot requirements.

	DT	MU
Maximum Density (units/acre)	22.0	15.0
Residential Uses
Minimum Lot Size (per dwelling unit)	900	1,800
Minimum Lot Width	30 ft.	40 ft.
Minimum Lot Frontage/Street Frontage*	25 ft.	30 ft.
Nonresidential Uses
Minimum Lot Size	No minimum	No minimum
Minimum Lot Width	No minimum	No minimum
Minimum Lot Frontage/Street Frontage*	No minimum	No minimum
Note: * Any lot without street frontage must have an unobstructed access easement at least 25 ft. wide (see § 154.152(E)).

 

   (C)   Building placement requirements.

	DT	MU
Residential Uses
Minimum Front Setback	10 ft.	10 ft.
Minimum Street Side Setback	7 ft.	7 ft.
Minimum Side Setback*	5 ft.	5 ft.
Minimum Rear Setback	5 ft.	10 ft.
Minimum Separation of Primary and Accessory Buildings	6 ft.	6 ft.
Nonresidential Uses
Minimum Front Setback	0 ft.	0 ft.
Minimum Street Side Setback	0 ft.	0 ft.
Minimum Side Setback	0 ft.	0 ft.
Minimum Rear Setback	0 ft.	0 ft.
Minimum Separation of Primary and Accessory Buildings	6 ft.	10 ft.
Note: * The side yard setback between attached units within the same building is 0 ft.

 

   (E)   Permitted uses. See § 154.039.

   (F)   Parking requirements. See § 154.112.

   (G)   Architectural standards. See § 154.148.

(Ord. 2022-17, passed 7-19-2022)