§ 50.16 CUT-OFF/CUT-ON VALVE INSTALLATION.
   (A)   Where installation of cut-off/cut-on valve is necessary the property owner will bear the cost of installation and material of the cut-off/cut-on valve, whichever is further from the main line.
      (1)   Where a service has no cut-off/cut-on valve or meter, the city will maintain the line between the main line and the property line.
      (2)   All lines under this section will be maintained by the city only, if working easements are granted by property owners where lines are on private property. These lines will be replaced by the city where needed only if easements are granted by the individual property owner. Only the trunk line portion of the sewer line will be maintained by the city and not the portion that goes to the individual hookups. In the event an individual easement is not granted, that individual property owner will remain responsible for all costs of maintenance for that section of line.
   (B)   Each property owner shall be responsible for maintenance of all lines from the property line, meter, or cut-off/cut-on valve, as applicable, to the point or points of use.
   (C)   No person, other than a qualified workman, under the supervision of the Superintendent of Public Works, may install, remove, work on, or tamper with any of the equipment listed in division (A)(2) above.
   (D)   Any line installed by an individual must meet any and all specifications of state, federal and local codes applicable, and must remain open until inspected and approved by the Superintendent of Public Works. Failure to comply with this section will result in disconnection or nonconnection of services until this section is complied with.
(Ord. 80-10, passed - - )