All lot corners shall be marked by either a three-fourths-inch diameter round or three-fourths-inch square iron rod or three-fourths-inch iron pipe at least 30 inches long set on the lot corner. All block corners, and the beginning and end of all curves or curved streets or angle points in streets, shall be marked with a permanent marker set in a concrete post, the concrete having a minimum length of 36 inches and a minimum cross-section of a four-inch diameter circle. This marker shall be set sufficiently below the surface of the ground to make its disturbance unlikely.
(2016 Code, § 9.108) Penalty, see § 10.99