(a) Location. Monuments shall be placed at each change of direction of a subdivision, dedication or development boundary, at the point of intersection of the centerlines of all streets, at the beginning and end of each street centerline curve and at the center of each cul-de-sac. Monuments in the street centerlines shall be placed upon the completion of paving. Monuments outside of the street pavement shall be placed or verified upon the completion of work in the immediate area of the location of the monument.
(b) Standards. Monuments and markers shall be set approximately one-fourth (1/4) inch above finished grade and shall be:
(1) Concrete monuments cast in place using a copper or iron dowel pin insert for the point marker. The cast-in-place concrete shall be approximately six (6) inches in diameter and thirty-six (36) inches deep. The dowel shall be embedded at least three (3) inches into the concrete.
(2) Iron or steel bars with a diameter of one-half (1/2) inch to one (1) inch and a length not less than thirty-six (36) inches.
(Ord. 2000-14. Passed 7-24-00.)