(a) All lots shall have the required frontage on an improved public street or an approved private street.
(b) Lots in subdivisions located within the Village of Ashville shall meet the dimension and area requirements of the zoning district in which the subdivision is located.
(c) All residential lots shall be approximately rectangular in shape, and should not have a depth in excess of three (3) times their width, except where extra depth is necessary due to topography and/or natural conditions, or to meet the requirements of this Zoning Code.
(d) Double frontage and reverse frontage lots should be avoided, except where required to provide separation from arterial streets, or to overcome specific conditions of topography and/or orientation. In such cases, an easement shall be provided along the rear lot line across which there shall be no vehicular access.
(e) Whenever possible, side lot lines should be at right angles or radial to street lines.
(f) Except where alleys are provided for such purpose, each lot shall have necessary easements along side and rear lot lines for utility lines. Such easements shall not be less than eight (8) feet wide on each lot.
(g) Easements shall be provided on both sides of any open drainage courses for the purposes of widening, deepening or general maintenance. Such easements shall be a minimum of fifteen (15) feet wide from the design width of the drainage course.
(Ord. 2000-14. Passed 7-24-00.)