Except as otherwise provided in this section, no structure shall be erected, altered or maintained, and no trees shall be allowed to grow in any district created by this section to a height in excess of the applicable height limitations herein established for each district in question as follows:
(A) Approach Zone - ACAD-A:
Runway 28 = slopes 34 feet outward for each one foot upward beginning at the end of and at the same elevation as the primary surface and extending to a horizontal distance of 10,000 feet along the extended runway centerline.
Runway 10 = slopes 20 feet outward for each one foot upward beginning at the end of and at the same elevation as the primary surface and extending to a horizontal distance of 5,000 feet along the extended runway centerline.
(B) Transitional Zones - ACAD-T:
Slopes seven feet outward for each foot upward beginning at the side of and at the same elevation as the primary surface and the approach surface, and extending to a height of 150 feet above the airport elevation or 3,333 feet above mean sea level. In addition to the foregoing, there are established height limits sloping seven feet outward for each foot upward beginning at the sides and at the same elevation as the approach surface, and extending to where they intersect the horizontal surface.
(C) Horizontal Zone - ACAD-H:
Established at 150 feet above the airport or at an elevation of 3,333 feet above mean sea level.
(D) Conical Zones - ACAD-C:
Slopes 20 feet outward for each foot upward beginning at the periphery of the horizontal zone and at 150 feet above the airport elevation and extending to an elevation of 3,533 feet above mean sea level. There are four conical zones (ACAD-C-A, ACAD-C-B, ACAD-C-C, and ACAD-C-D) 1,000 feet horizontally each and rise 50 feet in elevation. The maximum height of any structure within the conical zone is as follows:
ACAD-C-A = 3,333 feet MSL
ACAD-C-B = 3,383 feet MSL
ACAD-C-C = 3,433 feet MSL
ACAD-C-D = 3,483 feet MSL
(Ord. passed 7-15-24)