(A) Where driveways are required, they shall be constructed in conformance with the following requirements, as described in the Archbold Engineering Standards Manual:
(1) The Typical Type 2 driveway shall be installed for residential lots.
(2) The Typical Type 1, Type 3, or Type 4 driveway shall be installed for commercial and industrial lots and for alley approaches.
(B) Within the street right-of-way, residential driveways shall be Portland cement concrete pavement with a thickness of six inches. Commercial, industrial, and alley driveways shall be Portland cement concrete pavement a minimum of eight inches within the street right-of-way.
(C) The minimum driveway width shall be ten feet.
(D) Driveways within the right-of-way shall have a maximum grade of 8%. Commercial and industrial driveways should have a maximum grade of 4%.
(E) Driveways shall be located at least three feet from the side lot line.
(Ord. 2024-16, passed 2-19-2024)