(A) The following minimum area standards and requirements shall be met. No improvements shall be placed on lands unless the lands to be so used or improved shall meet the following minimum area and dimensional requirements. The city may vary these minimum requirements when construction is done in accordance with an overall development plan.
(1) Minimum area requirements and standards are as set out in Appendix C.
(2) Maximum impervious surface, see § 155.350.
(3) Screening, see § 155.348.
(4) Landscaping, see § 155.349.
(6) Building materials, see § 155.346.
(7) Off-street loading areas, see § 155.354.
(B) Additional area standards and requirements. The following requirements are in addition to those in division (A) above. Where there may be a conflict, those requirements under this section shall prevail:
(1) Front setbacks prevailing. Where adjoining structures existing at the time of adopting of this chapter have a greater setback than that required by this chapter, the front setback of a new structure shall conform to the prevailing setback in the immediate vicinity. The building inspector shall determine the necessary front yard setback in such cases. In no case shall a building be required to be set back more than 50 feet.
(2) Side and rear setbacks, party walls. Buildings may be excluded from side and rear setback requirements if party walls are used and if the adjacent buildings are constructed as an integral structure. This shall not permit structures closer to residential districts, however, than required under division (A) above.
(‘81 Code, § A1-40) (Ord. 291, passed 4-21-83; Am. Ord. 436, passed 2-23-89; Am. Ord. 447, passed 6-22-89; Am. Ord. 471, passed 1-11-90)