(A) Lot size requirements. Each lot of a manufactured home park shall have a minimum gross area of 5,000 square feet, with the lot width at the manufactured home front facing the street of not less than 50 feet; Twin 10 and Twin 12 manufactured homes shall require a front of 60 feet.
(B) Setback requirements. Each manufactured home placed on a lot shall be placed with the following minimum setbacks, as measured from the outside edge of the furthest protrusion:
(1) Front. Fifteen feet from the roadway curb face.
(2) Rear or side. Twenty feet from any adjacent manufactured home and/or structure attached to a manufactured home.
(3) Corner lot. Setbacks shall be the same as a front setback along any roadway.
(C) Permitted encroachments. The following accessory and mechanical appurtenances may encroach into the required setback areas as follow:
(1) Steps, stoops and landings. Attached steps, uncovered stoops and landings may intrude up to five feet into the setback area, provided that they do not exceed 20 square feet in area. Under no circumstance shall a step, stoop or landing be located closer than ten feet to another manufactured home or attachment thereto.
(2) Air conditioners. Air conditioner units may intrude up to five feet into the setback area.
(3) Eaves and overhangs. An eave or overhang may intrude up to one foot into the setback area.
(‘81 Code, § 13-34) (Ord. 43, passed 9-14-67; Am. Ord. 515, passed 5-23-91)