(A) Zone 1. Within this zone, no structure or land shall be used for the following uses or uses deemed similar by the City Council, except by conditional use permit:
(1) Motor fuel sales either as principle use or accessory use;
(2) Outdoor display or sales of motorized vehicles, or outdoor storage of such vehicles which are offered for sale, when associated with a related structure that occupies at least 5% of the total lot area and which contains sales offices, service facilities, or administrative support offices. All display/sales/ storage areas shall be covered with a paved surface, have a concrete perimeter curb, and have a setback of at least five feet from an interior lot line and a setback of at least 20 feet from a street right-of-way or easement line, except that this may be reduced to five feet where it is adjacent to the bulb portion of a cul- de-sac. Lighting plans for outdoor display/sales/ storage must be specifically reviewed and approved by the City Council to ensure compatibility with adjacent properties and the downtown commercial area as a whole regarding the color of the poles and fixtures, the luminary color temperature and the light intensity;
(3) Outdoor storage of damaged vehicles, when adequately screened as determined by the City Council;
(4) Major anchor/center sign subject to the requirements of Chapter 154;
(5) Building elevations facing a public street having garage bay doors along more than 50% of its length, when the City Council determines that special architectural treatment of the bay doors or elevation containing said doors has occurred which softens, camouflages or minimizes the appearance of the doors from the affected public street. Appropriate architectural treatment shall include, but not be limited to: projections which incorporate the doors into special architectural elements that disguise their use; pergola or overhanging canopies, deeply recessed bay doors, special color or surface textures or similar treatments; or
(6) Buildings constructed with exposed vertical exterior finish materials other than those provided in § 155.346 when:
(a) The proposed materials represent the same or similar materials used on at least 66.7% of the existing buildings adjacent to the site;
(b) The proposed materials are demonstrated to be of comparable grade and quality as those otherwise required; and
(c) Under no circumstance shall sheet or corrugated iron, aluminum, steel, asbestos, sheet plywood, plain or painted plain concrete block or similar materials be used. Any decorative concrete block shall be colored only by means of a pigment impregnated throughout the entire block.
(‘81 Code, § A20-3) (Ord. 541, passed 7-23-92)