(A) Low Density Residential District (R-1).
(1) The R-1 Low Density Residential District is intended to provide areas in the village for single-family detached residential development at a relatively low density.
(2) When developed according to the regulations, these areas will constitute areas of sound, extensive residential development on large lots.
(3) New districts established shall have a minimum of five acres.
(B) Medium Density Residential District (R-2).
(1) The R-2 Medium Density Residential District is intended to provide areas reserved exclusively for single-family detached residential development at a medium density.
(2) When developed according to regulations, these areas will constitute areas of sound, extensive residential development on average sized lots.
(3) New districts established shall have a minimum of four acres.
(C) Medium-High Density Residential District (R-3).
(1) The R-3 Medium-High Density Residential District is intended to provide areas reserved exclusively for multi-family attached residential development.
(2) It is intended that R-3 Districts be developed on lands which are undeveloped and/or strategically located sites with respect to the village’s commercial areas, and frontage on arterial streets.
(3) New districts established shall have a minimum of one acre.
(D) Use limitations and standards.
(1) Double frontage lots. Where lots have a double frontage, the required front yard shall be provided on both streets.
(2) Corner lots. Lots formed at the intersection of two streets shall be required to provide two front yard setbacks. The property owner shall determine the rear and side yard.
(3) Accessory uses. No accessory uses or buildings shall be located in the required front yard of any lot. Each lot shall be limited to two accessory uses or buildings.
(Ord. 1227-98, passed 1-12-1999; Am. Ord. 1574-11, passed 6-14-2011)