A. General: Construction of curb and gutter must conform to the current village of Angel Fire standard details, and materials to the current edition of the New Mexico department of transportation "Standard Specifications For Road And Bridge Construction".
B. Exterior Curb Section: Standard six inch (6") high barrier type curb and gutter, as shown in the standard details, must be used as the exterior curb section for all classes of arterial collector, and major local streets. Deviations from these standards will require written approval of the village public works director, and shall be considered only in developing, semiurban or rural areas.
C. Median Curb: Median curb must be either a barrier or mountable as required by the village public works director for the street in question.
D. Barrier Curb And Gutter: The village public works director shall require barrier curb and gutter or mountable type curb at developing, semiurban areas, and rural areas which would normally require a rural street section. Factors that influence such requirements are:
1. Improving the drainage capability of the roadway to accommodate flows in developments of two (2) or more dwelling units per acre or where the roadway will be subject to large surface flows.
2. Elimination of potential shoulder deterioration of the roadway due to heavy load traffic.
3. Reduction of shoulder maintenance.
E. Sidewalks: If curb and gutter is required, the village public works director may also require sidewalks. (Ord. 2007-06, 8-14-2007)