(A) The Plumbing Inspector shall be responsible for the completion of all required inspections which shall be indicated on the permit card.
(B) The permittee shall contact the Department and schedule an inspection when work, for which an inspection is required or requested by the Plumbing Inspector, is complete, and such notice shall be given 24 hours before an inspection is requested.
(C) The Department shall endeavor to schedule all inspections as requested; however, priority is given to inspections which involve an immediate life safety issue and on a first call-in basis.
(D) When any part of a plumbing installation is to be hidden from view by permanent placement of parts of the building, no parts of the plumbing installation shall be concealed until they have been inspected and approved by the Plumbing Inspector. On large installations the firm or corporation installing the plumbing may request the Plumbing Inspector to complete periodic inspections of the work to allow the concealment of plumbing work which has passed inspection.
(E) The Department may assess a re-inspection fee for requested inspections, not cancelled at least three hours prior to the earliest scheduled time requested for an inspection, where work is not completed by the time requested for inspection, or for work not in compliance with applicable law.
(F) The Plumbing Inspector shall note the passing of each inspection, or the deficiencies and/or corrective work required, on the building permit card at the time of inspection. A re-inspection shall be requested by the permittee once corrective work is completed and must pass inspection prior to any additional work being completed which would require a separate inspection.
(Ord. 2017-11, passed 8-14-2017; Ord. 2018-7, passed 6-25-2018)