This development area provides for the orderly development of detached single-family housing (see Exhibit No. 27 of the Specific Plan). The standards of the "RS-3" Single-Family Residential Zone in Chapter 18.04 (Single-Family Residential Zones) shall apply, except as otherwise provided below:
.010 Minimum Building Site and Building Pad Area. The minimum building site shall be five thousand (5,000) square feet, and the minimum building pad area four thousand (4,000) square feet.
.020 Minimum Lot Width and Frontage. All lots shall have a minimum width of not less than forty-five (45) feet.
.030 Minimum Lot Width for Cul-de-Sac and Knuckle Lots. The minimum lot width for cul-de-sac and knuckle lots shall be forty (40) feet, measured at the building setback.
.040 Minimum Lot Frontage Width of Flag Lots. The minimum lot frontage width at right-of-way shall be twenty (20) feet.
.050 "Front-On" Garages. The minimum setback to any "front-on" garage shall be not less than twenty (20) feet with a roll-up garage door, or twenty-five (25) feet with a standard door, measured from the garage door to the back of the sidewalk.
.060 Minimum Dimensions of Parking Spaces. Required open parking spaces shall be permitted in a driveway having minimum dimensions of sixteen (16) feet wide and twenty (20) feet long, measured from the garage door to the back of the sidewalk.
.070 Required Site Screening. Except as otherwise provided herein, a solid, decorative-type, masonry wall, landscaped earthen berm, or any combination thereof, totaling not less than six (6) feet in height, shall be provided along, and immediately adjacent to, the site boundary line of any single-family development abutting any arterial highway, any commercial or multiple-family zone boundary, or any alley abutting any such boundary. The height of any such wall and/or berm shall be as measured from the highest finished grade level of the building pad of the dwelling units located nearest any such abutting boundary. The Planning Director shall review and approve plans for solid fences adjacent to any public street, in cases where views could be obstructed.
However, in conditions where a grade separation between any arterial highway and property line occurs at a minimum of six (6) feet, and a minimum setback of twelve (12) feet exists between the single-family development and conditions as stated above, an open, decorative-type wall is permitted in order to allow and preserve view opportunities.
.080 Coverage and Open Space Requirements. The maximum coverage by all residential and accessory buildings shall be forty percent (40%). (Ord. 5920 § 1 (part); June 8, 2004.)