.010 Density and Minimum Lot Area. The minimum lot area per dwelling unit for multiple-family residential zones is shown in Table 6-D. The maximum density permitted on a parcel shall be the lesser of what is permitted by the following table or the maximum density permitted based on the parcel’s General Plan land use designation. The boundaries of the development site used to determine the maximum density permitted by the General Plan is based on the Gross Acre(s) of the property as defined in Section 18.92.040 (Acres, Gross).
Table 6-D SITE AREA PER DWELLING UNIT: MULTIPLE-FAMILY RESIDENTIAL ZONES | |
Zone | Minimum Lot Area Per Dwelling Unit |
RM-1 | 3,350 square feet, but may be modified pursuant to 18.06.160 |
RM-2 | 3,000 square feet |
RM-3 | 2,400 square feet |
RM-3.5 | 1,600 square feet |
RM-4 | 1,200 square feet |
.020 Unless specified otherwise, the minimum lot area measurement in Table 6-D excludes public and private streets and alley rights-of-way
.030 Building Site Requirements in Chapter 18.40
(Ord. 5920 1 (part); June 8, 2004: Ord. 6286 § 4; September 3, 2013: Ord. 6436 § 5; April 24, 2018.)