(A) An industrial wastewater discharge permit shall include such conditions as are deemed reasonably necessary by the Public Works Superintendent to prevent pass through or interference, protect the quality of the water body receiving the treatment plant’s effluent, protect worker health and safety, facilitate biosolids management and disposal, and protect against damage to the POTW.
(B) Industrial wastewater discharge permits and general permits must contain:
(1) A statement that indicates the wastewater discharge permit issuance date, expiration date, and effective date;
(2) A statement that the wastewater discharge permit is nontransferable without prior notification to the City in accordance with § 55.036, and provisions for furnishing the new owner or operator with a copy of the existing wastewater discharge permit;
(3) Effluent limits, including Best Management Practices, based on applicable pretreatment standards;
(4) Self monitoring, sampling, reporting, notification, and record-keeping requirements. These requirements shall include an identification of pollutants (or Best Management Practice) to be monitored, sampling location, sampling frequency, and sample type based on federal, state, and local law;
(5) The process for seeking a waiver from monitoring for a pollutant neither present nor expected to be present in the discharge in accordance with § 55.054(B);
(6) A statement of applicable civil and criminal penalties for violation of pretreatment standards and requirements, and any applicable compliance schedule. Such schedule may not extend the time for compliance beyond that required by applicable federal, state, or local law;
(7) Requirements to control slug discharge, if determined by the Public Works Superintendent to be necessary; and
(8) Any grant of the monitoring waiver by the Public Works Superintendent (see § 55.054(B)) must be included as a condition in the industrial user’s permit or other control mechanism.
(C) Industrial wastewater discharge permits may contain, but need not be limited to, the following conditions:
(1) Limits on the average and/or maximum rate of discharge, time of discharge, and/or requirements for flow regulation and equalization;
(2) Requirements for the installation of pretreatment technology, pollution control, or construction of appropriate containment devices, designed to reduce, eliminate, or prevent the introduction of pollutants into the treatment works;
(3) Requirements for the development and implementation of spill control plans or other special conditions including management practices necessary to adequately prevent accidental, unanticipated, or not routine discharges;
(4) Development and implementation of waste minimization plans to reduce the amount of pollutants discharged to the POTW;
(5) The unit charge or schedule of industrial user charges and fees for the management of the wastewater discharged to the POTW;
(6) Requirements for installation and maintenance of inspection and sampling facilities and equipment, including flow measurement devices;
(7) A statement that compliance with the industrial wastewater discharge permit does not relieve the permittee of responsibility for compliance with all applicable federal and state pretreatment standards, including those which become effective during the term of the industrial wastewater discharge permit; and
(8) Other conditions as deemed appropriate by the Public Works Superintendent to ensure compliance with this chapter, and state and federal laws, rules, and regulations.