(A) General. Construction plans shall be prepared for all required improvements. Plans shall be drawn on standard 24 by 36 inch sheets at a scale of no more than 1 inch equals 50 feet.
(B) Features. The plans shall show the following:
(1) Profiles showing existing and proposed elevations along center lines of all streets. Where a proposed street intersects an existing street or streets within 100 feet of the intersection. Approximate radii of all curves, lengths of tangents, and central angles on all streets.
(2) The Plan Commission may require, where steep slopes exist, that cross-sections of all proposed streets at 100-foot stations shall be shown at five points as follows: On a line at right angles to the center line of the street, and the elevation points shall be at the center line of the street, each property line, and points 25 feet inside each property line.
(3) Plans and profiles showing the location and typical cross-section of streets including curbs and gutters, sidewalks, rights-of-way, drainage facilities, manholes, and catch basins; the location, size and invert elevations of existing and proposed sanitary sewers, storm water drains, and fire hydrants, showing connection to any existing or proposed utility systems; the location of street trees, street lighting standards, and street signs; and exact location and size of all water, gas, or other underground utilities or structures.
(4) Location, size, elevation and other appropriate description of any other existing physical and natural features or facilities, including features noted on the official maps of the town, trees with a diameter of eight inches or more (measured four feet above ground level), the points of connection to proposed facilities and utilities, and the approximate high- and low-water elevations of all ponds, lakes and streams. All elevations shall be referred to the U.S.G.S. datum plane.
(5) Topography at the same scale as the sketch plat, with contour intervals at two and/or five feet, depending on the terrain type.
(6) All specifications and references required by the town’s construction standards and specifications, including a site-grading plan for the entire subdivision, and a traffic control and barricading plan, where required.
(7) Space for notation of approval as follows:
APPROVED BY:
Owner_______________ Date____________
Plan Commission Chairman_______________
Date___________
(8) Title, name, registration number (seal), address, and signature of professional engineer and surveyor, and date.
(Ord. - -, passed - -80)