§ 51.072 INSPECTION, TESTING AND MAINTENANCE OF SEWER SYSTEM.
   (A)   Right of access to easements. The Superintendent and other duly authorized employees of the town bearing proper credentials and identification shall be permitted to enter all private properties through which the town holds a duly negotiated easement for the purposes of, but not limited to, inspection, observation, measurement, sampling, repair and maintenance of any portion of the sewage works lying within the easement. All entry and subsequent work, if any, on the easement shall be done in full accordance with the terms of the duly negotiated easement pertaining to the private property involved.
(`86 Code, § 2-4-19)
   (B)   Right of access to private properties generally. The Superintendent, Inspector and other duly authorized employees of the town bearing proper credentials and identification shall be permitted to enter all properties for the purposes of inspection, observation, measurement, sampling and testing in accordance with the provisions of this chapter.
(`86 Code, § 2-4-20)
   (C)   Observance of company safety rules; indemnification of companies. While performing the necessary work on private properties referred to in division (B) of this section, the Superintendent or duly authorized employees of the town shall observe all safety rules applicable to the premises established by the company and the company shall be held harmless for injury or death to the town's employees, and the town shall indemnify the company against loss or damage to its property by town employees and against liability claims and demands for personal injury or property damage asserted against the company and growing out of the gauging and sampling operation, except as such may be caused by negligence or failure of the company to maintain safe conditions as required in § 51.071(D).
(`86 Code, § 2-4-21)
   (D)   Confidentiality of industrial processes. The Superintendent or his or her representatives shall have no authority to inquire into any processes, including metallurgical, chemical, oil refining, ceramic, paper or other industries beyond that point having a direct bearing on the kind and source of discharge to the sewers or waterways or facilities for waste treatment.
(`86 Code, § 2-4-22)
   (E)   Character and standards of tests and measures. All measurements, tests and analyses of the characteristics of waters and wastes to which reference is made in this chapter shall be determined in accordance with the latest edition of "Standard Methods for the Examination of Water and Wastewater," published by the American Public Health Association and shall be determined at the control manhole provided or upon suitable samples taken at the control manhole. In the event that no special manhole has been required, the control manhole shall be considered to be the nearest downstream manhole in the public sewer to the point at which the building sewer is connected. Sampling shall be carried out by customarily accepted methods to reflect the effect of constituents upon the sewage works and to determine the existence of hazards to life, limb and property. (The particular analyses involved will determine whether a 24 hour composite of all outfalls of a premises is appropriate or whether a grab sample or samples should be taken. Normally, but not always, BOD and suspended solids analyses are obtained from 24 hour composites of all outfalls whereas pH's are determined from periodic grab samples.)
(`86 Code, § 2-4-23)
(Ord. 6-9-70-3, passed - -; Am. Ord. 86-C2, passed 7-15-86)