8-6-4-2: PRELIMINARY PLAT SPECIFICATIONS:
   A.   Drawing Specifications: All mapped information shall be prepared in a neat and legible manner and drawn to a scale of not more than one hundred feet (100') to the inch. A smaller scale or different size may be used for large developments with prior written approval from the director. Limits of the drawing shall include an area not less than three hundred feet (300') beyond boundaries of the proposed development. All maps shall show:
      1.   The subdivision boundary that is based on an actual field survey including the stamp of the licensed professional land surveyor certifying and stamping the boundary survey of the plan. Boundary problems shall be resolved and nonbuildable remnant properties are prohibited. Certification and stamping of the plan by the professional land surveyor is intended to pertain only to the boundary survey.
      2.   The name of the owner.
      3.   The name of the person or firm responsible for the drawing.
      4.   The name of the proposed subdivision in accord with Idaho Code section 50-1307.
      5.   The date, graphic scale, true north arrow, vicinity map, section, township, and range.
      6.   Ties to all controlling corners.
      7.   The names of neighboring subdivisions as listed in the assessor's files.
      8.   The names of owners of neighboring properties as listed in the assessor's files, and the boundaries of all neighboring properties.
      9.   The name, location, width, direction of slope, centerline and right of way of all existing and proposed public streets and private roads.
      10.   The proposed off site improvements pertaining to streets, water supply, sanitary sewer systems, storm water systems, fire protection facilities, and proposed utilities.
      11.   The lot layout with lot and block numbers, lot dimensions, and lot area in square feet.
      12.   The minimum setbacks from the front, the side, and the rear property lines.
      13.   Areas of special use, e.g., parks and schools, shall be appropriately labeled.
   B.   Separation Of Information: The director may require separation of information to a separate drawing(s) to assist in delineation of specific information. (Ord. 389, 6-14-2000; amd. Ord. 426, 9-26-2001; amd. Ord. 490, 4-9-2003)