8-2C-4:DIMENSIONAL STANDARDS:

Tables 8-2C-2 and 8-2C-3 of this section shall be used for development in the respective commercial base districts. Structure greater than ten thousand (10,000) square feet is prohibited in LO and C1 districts.

TABLE 8-2C-2: MINIMUM SETBACKS BY COMMERCIAL BASE DISTRICT

 

Minimum Setbacks (In Feet)	LO		C1		C2		C3
	Standard	Abutting Residential	Standard	Abutting Residential	Standard	Abutting Residential	Standard	Abutting Residential
Front yard setback	20	varies1	20	20	20	20	35	50
Side street setback	20	varies1	20	20	20	20	35	50
Interior side yard setback	10	10	0	10	0	20	35	50
Rear yard setback	10	20	0	20	0	20	35	50

 

Note:

   1.   The front and side street setback shall be as set forth in the abutting residential district with the most restrictive standards.

TABLE 8-2C-3: DIMENSIONAL STANDARDS BY COMMERCIAL BASE DISTRICT

 

Dimensional Standards	LO	C1	C2	C3
Property size	6,000 square feet	6,000 square feet	6,000 square feet	100,000 square feet
Maximum coverage (percent)	50	50	n/a	50
Maximum structure height (in feet)	35	35	50	50
Minimum street frontage (in feet)1,2	30	30	30	600
Minimum property depth (in feet)	100	100	100	200

 

Notes:

   1.    This requirement may be modified if requested as part of an approved final plat.

   2.    Developments utilizing continuous service drives may be exempt from the roadway frontage requirements.

(Ord. 389, 6-14-2000; amd. Ord. 660, 5-9-2007; amd. Ord. 763, 10-13-2010)